Remote Introduction
1）How to pair the board and remote
1. Keep both remote and board powered off.
2. Hold the power button of them both at the same time until the remote displays "PAIRED OK".
3. Scroll the throttle to select options of setting, and press the remote power button to confirm.
You’ll go through the following settings:
UNIT SYSTEM - Select from 【KM/H KM】 and 【MPH MILE】.
MOTOR TYPE - Select【BELT】
WHEEL DIAMETER - Select the actual size of wheels you are going to use from【80-200】.
DRIVE RATIO – Select【2.9】for 40T Pulley，【4.3】for 60T Pulley. (Tooth/14，eg: 60/14≈4.3)
MOTOR POLE PAIRS – Select 【7】.
2）How to adjust the speed mode
-Press speed mode switch to adjust speed for your riding mode.
| Speed Mode |
Top Speed in Each Mode |
| L (Low) |
12 mph/20 kph |
| M(Medium) |
18 mph/30 kph |
| H(High) |
25 mph/40 kph |
| P (Pro) |
31 mph/50 kph (Instantaneous Acceleration) |
3）Brake Intensity changes with speed modes
4）Auto Cruise
-Hold the throttle to accelerate to a certain speed, and press the upper button.
