Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
1 / 5
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
Belt Drive Kit
1 / 5

Belt Drive Kit for Lycaon Swift-Belt

$359.00
$359.00 Save $0.00
people are viewing this right now
Options

Specs

Rated Power: 850 Watts x2

Max. Power: 1600 Watts x2

Torque: 6.6 Nm x2

Truck Width: 8 inches

Wheels: 78A 90mm

Compatibility: 90mm PU Wheels & 97mm PU Wheels & 105mm Cloudwheels

 

About Swift-Shift

The board and the remote are already paired for sale, if you want to change the drive motors, follow the steps below to do the re-connecting.

1. Keep both remote and board powered off.

2. Hold the power button of them both at the same time until the remote displays "PAIRED OK".

3. Scroll the throttle to select options of setting, and press remote power button to confirm.

If you select HUB motors, you’ll go through the following settings:
UNIT SYSTEM - Select from 【KM/H KM】 and 【MPH MILE】.
MOTOR TYPE - Select from【HUB】and 【BELT】
WHEEL DIAMETER - Select the actual size of wheels you are going to use from【80-200】.
MOTOR POLE PAIRS – Select 【11】.

If you select BELT motors, you’ll go through the following settings:
UNIT SYSTEM - Select from 【KM/H KM】 and 【MPH MILE】.
MOTOR TYPE - Select from【HUB】and 【BELT】
WHEEL DIAMETER - Select the actual size of wheels you are going to use from【80-200】.
DRIVE RATIO – Select【2.6】.
MOTOR POLE PAIRS – Select 【7】.

4. Leave the remote on and restart the board. Once the board is on, press the board power button quickly and immediately for 5 times. The board will enter into the auto-learning process. If fails, turn off the board with the remote on and try again.

5. The auto-learning process will last about 60 seconds. Do NOT move or touch the board during the auto-learning.

6. When the auto-learning finished, turn off the remote then the board will accordingly power off.

7. Use remote only to power on both remote and board. Now, you are good to go.